BRUNETTI - VECTOR EFFECTS MIDI CONTROLLER Vector is a professional system able to switch and patch stomp boxes.
It has been designed without compromises in the choice of components and circuit solutions.
Vector circuit uses hi-dynamic power buffer, built around class “A” mosfets.
This design delivers sonic hi performances, especially with vintage equipments Vector’s buffers are supplied by hi voltage. This solution gives very high dynamic,
ten times more than the normal dynamic requests from your equipments.
The result is a sonically transparent signal path, with very low noise distortion and wide frequency response.
All the critical switchings are made by opto-coupled switches, to avoid any type of “click” and “pop”.
All the outputs to external systems are buffered and floating by a transformer. This is to eliminate any type of “ground loop” and noise.
Vector has a small power amp (1W) useful to play with a headphone or a monitor.
This “monitor” section can be used when there isn’t the possibility to connect the system to external amps.
Vector has the Emulated line out that allows to play directly into the mixer or for recording session.
Vector logic is built around a microprocessor, that stores up to 28 presets and related midi program change, and drives the display and the hardware.
There are 6 loops + 1 fix loop. Into the fix loop you can connect the Vectorexp that adds 6 loops more to the system. Totally you’ll have 12 loops. This extension
is driven via midi.
Another exclusive feature of Vector is the “Insert Split” that physically splits the effects in two groups. The first is for synthesis effects like distortions, compressors, eq,
etc; while the second is for the modulation effects like delays, chorus, etc.
Vector puts the first group before the input of the amp, while the second group is in the loop of the amp. In this way you can use the preamp and the loop of the amp together with pedals. Absolutely unbelievable!!
Vector has three type of power supply for pedal effects, and it is supplied with set of cable for this purpose.
9VdC (max 500mA),12VdC (max 500mA) power supply for pedals,9VaC (max 1A) for POD, and other special effects.
Attention: You may supply only a single appliance. 
Specifications : - 5 transparent clickless loop.
- 1 transparent clickless loop serial/parallel with MIX control.
- 1 fix loop for VECTOREXP connection.
- Input transparent buffer ( “A” class mosfet hi-dynamic supply ).
- Buffered tuner out.
- Insert Split loop.
- 4 remote switches.
- A, B out buffered, balanced and floating ( Split transformer ).
- Total true Bypass function.
- System Mute function.
- Absolutely very low noise circuitry.
- On board 1W power amplifier for low level speaker.
- Headphone output jack.
- Emulated, balanced and floating XLR out for direct to mixer or recording.
- Midi out ( 28 program change ).
- 4 banks (0 to 3) and 7 presets (0 to 7).
- “Built in” power supply.
- 9VdC (max 500mA),12VdC (max 500mA) power supply for pedals.
- 9VaC (max 1A) for POD, and other special effects.
Attention: You may supply only a single appliance.
- Dimensions : 625 x 175 x 85 mm
- Weight : 4 kg.
|
BRUNETTI - VECTOR
